Company Details

  • Damei Kingmech Pump Co., Ltd.

  •  [Hebei,China]
  • Business Type:Manufacturer
  • Main Mark: Africa , Americas , Asia , Caribbean , East Europe , Europe , Middle East , North Europe , Oceania , Other Markets , West Europe , Worldwide
  • Exporter:91% - 100%
  • Certs:ISO14001, ISO9001, OHSAS18001, API, CE
  • Description:API 610 Centrifugal Oil Pump,API610 Petroleum Pump,API610 Centrifugal Pump
Inquiry Basket ( 0 )

Damei Kingmech Pump Co., Ltd.

API 610 Centrifugal Oil Pump,API610 Petroleum Pump,API610 Centrifugal Pump

Home > Products > Petro-chemical Pump > High Quality API 610 Centrifugal Oil Pump

High Quality API 610 Centrifugal Oil Pump

Share to:  
    Payment Type: L/C,T/T,Paypal,Western Union
    Incoterm: FOB,CFR,CIF,FCA,CPT
    Min. Order: 1 Piece/Pieces
    Delivery Time: 30 Days

Basic Info

Model No.: BB2

Impeller Number: Single-Stage Pump

Working Pressure: High Pressure Pump

Influent Type of Impeller: Double-Suction Pump

Position of Pump Shaft: Horizontal Pump

Pump Casing Combined: Horizontal Split Pumps

Mounting Height: Suction Centrifugal

Impeller: Open

Usage: Condensate Pump

Additional Info

Packaging: Wooden box

Productivity: 10000

Brand: DK

Transportation: Ocean,Land,Air,DHL

Place of Origin: China

Supply Ability: 10000

Certificate: ISO, CE, SGS

HS Code: 8413708100

Port: Tianjin,Dalian

Product Description

Our factory produce all type API610 pumps, like BB1,BB2, BB3, BB4, BB5, OH1, OH2, OH3, OH4, OH5, VS1, VS4, VS6 etc.

You can find all your need pumps in our site.

Pump Description

Size: 1-24 inchessize: 1.5-10 inches
capacity: 2.5-600m3/h
head: 30-300m
temperature: -45-420 °C

Media: Liquid of Petrochemical industry

Material: Cast steel, SS304, SS316, SS316Ti, SS316L, CD4MCU

F008a9fe 302d 4c7b 86cc 790a243ce7fd

Design feature

-Type DSJH process pumps are single stage,single suction ,radial split case,

-Overhanging centrifugal pumps see constitution figures.

-The DSJH pumps are especially suitable for pumping high temperature,high

-Pressure and inflammable,explosive or toxic fluids.The pump case is centerline mounted in order to equalize thermal expansion and contraction.This reduces alignment problems caused by case movement due to temperature differential between operating and ambient conditions to minimum limit.Pump cases of 4 -inch and above 4-inch discharge nozzle dia,are double volute to balance the radial force of pumps.

-Pumps are self-venting with the pressure fluids flow.But bosses are provided ar the top of pump case volute.Vent tops can be drilled and lapped for drain holes,and plugged with a plug screw of the same material as the case when shipping.Drain tops are Rc3/4.

-The flange of pump suction and discharge nozzles are design perpendicularly upwards and are cast integrally with pump case.The flange size and pressure class comform to the standards of 300psi of American National standards institute ANSI.According to the difference of working temperature and material category.The max available pressure of flange can be 5MPa or so.

-In order to have reliability.the cases of BB2 process pump are made of cast steel.The hydrostatic test is 7Mpa.

- Pump cover contains a standard stuffing jacket for either packing or mechanical seal of balance.bellows or tandom type.Cover has an optional water jacket that is supplied when pumping temperature exceeds 66℃ for water and 150℃ for hydrocarbons or when specified .Stuffing box may also be used for low pressure steam or other insulated fluids when the pumped medium need to heal preservation.In and out fluid connection (RCI/2)are located at the bottom and top of the pump cover.

-Impeller is integrally cast and dynamically balance with the rotor.The impeller is key to the shaft.Rotor is supported by double bearings.Renewable casing and impeller wear rings are standards.Better materials and hardness will be used for both wear rings to ensure wear resistance .The front and back wear rings of impeller are intentionally design with different size.i.e.the wear ring which nears to thrust bearing is somewhat under tension conditions to avoid the clearance gap of rotor.

-The same size bearing housing are mounted at the two ends of pump.The material of bearing housing can be cast iron or cast steel.The bearing housing are fastened on bracket and allocated with fitting face.One set of radial bearing is fitted on coupling end and two sets thrust ball bearing arranged in back to back are mounted on another end.Bearing are lubed with oil rings.The quality of oil should be suitble.Each bearing housing is furnished with axial cooling lines for air cooling with optional water or fan cooling.The fan cooling range is 120℃-160℃.Water cooling flange is 260℃ and above.Air cooling is 120℃ and below.Among them the fan cooling range is 120℃ below.Among them the fan cooling is especially suitable for the lacking water or poor water quality.

-When fan cooling is used for the bearing of pump.Fan will take the place of deflector.This is unique feature of this kind of pumps and get a patent of America.Bearing housing is fitted with transparent plastic round mark indicating oil level and oiler to motor and control oil level .Two ends of bearing failure .The deflectors are not only prevent dust and moisture but also avoid oil leakage.

-A flexible membrane spacer coupling is provided for accessibility of service and maintenance of the BB2 process pumps.The spacer permits easy removal of impeller,bearing and packing etc.Without disturbing suction or discharge piping.


The BB2 process pumps are used for refinement of petroleum,petrochemical,chemical industry,pumping petroleum,liquefying petroleum etc.


1.The pumps are full compliance with the API610 standards of American Petroleum Institute and have high reliability.

2.The efficiency of this kind of pumps is the first level in the world.

3.Parts of pump have wide universal degree and exchangeability.Some of parts can be used for several series to make production easy and favor the control for spare parts.

4.The cooling fins are cast outsides of bearing housing which can increase cooled effects.And meanwhile.The rigidity of bearing housing is raised.The construction is new.There are kinds of cooling methods for the bearing, and water cooling.

5.The pump case is centerline mounted.The impeller can be assembled from two ends of pump case.It is convenient for maintenance.

6.The pump case is double volute to balance radial force.

7.The impeller is double suction construction.So there is a little end thrust.

8.The front and back is impeller wear rings are intentionally designed with different size.i.e.the wear ring which nears to thrust bearing is somewhat less than the other to make pump have slight axial force and shaft work under tension conditions to avoid the clearance of rotor.

9.Cone fit is adopted for coupling and shaft.

10.Packing or mechanical seal of single and double face,bellow and landed can be used for the shaft sealing.





Our Factory




Pre-Sales Service

* Inquiry and consulting support.

* Sample testing support.

* View our Factory.

After-Sales Service

* Training how to instal the machine, training how to use the machine.

* Engineers available to service machinery overseas.


Packing & Delivery

pump packing



(L) * (W) * (D)



Packaging Details

The normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special reques

Looking for ideal API 610 Centrifugal Oil Pump Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the API610 Petroleum Pump are quality guaranteed. We are China Origin Factory of API610 Centrifugal Pump. If you have any question, please feel free to contact us.

Product Categories : Petro-chemical Pump

Product Images
  • High Quality API 610 Centrifugal Oil Pump
Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
Paul Mr. Paul
What can I do for you?
Contact Supplier