Email Us
sales@pumpkingmech.com16 November 2026
A vertical froth pump is a practical fit for slurry circuits carrying froth, abrasive or corrosive slurry, and high-viscosity liquid. The VFD series covers 2-8 inches, 7-570m3/h, and 5-25m head, with direct or indirect drive options. Match those limits with the media, tangential inlet, spill-box return, bearing arrangement, materials, and vertical installation space.
2-8 inches
Pump size
7-570m3/h
Capacity
5-25m
Head
Cr27, Cr28, and CD-4MCu
Materials
The VFD Vertical Froth Pump fits vertical slurry duties where froth, abrasive or corrosive media, or high-viscosity liquid affects transport. We select it by matching the operating point to the series range, then checking the material condition, inlet path, drive arrangement, bearing support, and space around the vertical assembly.
The VFD series is suitable when the circuit needs a vertical centrifugal slurry pump for froth, abrasive slurry, corrosive slurry, or high-viscosity liquid. Its range covers several duties, but the required capacity and head still determine whether a particular pump size fits the circuit.
| Parameter | VFD series range or arrangement |
|---|---|
| Pump size | 2-8 inches |
| Capacity | 7-570m3/h |
| Head | 5-25m |
| Drive | Direct drive or indirect drive |
| Bearing options | TV, TVR, and PNL |
| Materials | Cr27, Cr28, and CD-4MCu |
Give us the required capacity and head together when you request a selection. The pump size should be considered with the operating point and the surrounding tank or pond arrangement before the equipment layout is fixed.
The tangential inlet is the key fit for frothy service. It lets material enter the pump swiftly and removes some froth. A spill box returns extra material to the pond, so the pump arrangement must connect logically with the feed vessel and return route.
This vertical froth pump suits flotation-related and mineral-processing duties where froth is part of the feed condition. The product is also used for high-viscosity liquids in copper mining, alumina mining, and ore processing. Metallurgical, coal chemical, and pulp and paper duties can also fit when the media and operating point are within the series range.
Before ordering, check the direction of material entry, the position of the spill-box return, and the connection between the pump, pond, tank, and piping. These checks determine whether the vertical arrangement can be integrated without changing the process flow path.
The material decision should follow the combination of abrasion, corrosion, and slurry composition. The VFD series is available with Cr27, Cr28, and CD-4MCu. Its construction uses steel framework or stainless steel, with steel plates and rubber linings in the described configurations.
For abrasive mineral slurry, review the material choice with the slurry description. For corrosive slurry, review the selected material and wetted construction together. When abrasion and corrosion occur in the same duty, send the media condition with the capacity and head so we can assess the pump arrangement as a complete selection.
The double-case design allows the centrifugal pump configuration to be adjusted for the media. This is useful when the slurry condition differs between duties or when the process combines froth with demanding solids conditions.
The VFD design supports direct and indirect drive. Direct drive suits a layout where the pump and motor arrangement can operate without belt adjustment. Indirect drive suits a layout where belt replacement and rotation-speed adjustment are part of the operating plan.
Leave access for belt replacement and adjustment when you choose an indirect drive. The bearing body attaches to the motor cabinet or motor frame, so the support structure and motor location should be reviewed at the same time as the drive arrangement. Confirm the bearing option and drive arrangement for the selected pump size before finalizing the structure.
A vertical structure fits a pond or tank arrangement when the site has enough room for the upright assembly and its connections. The pump bin uses a steel framework or stainless steel, with steel plates padded by rubber linings. Review these construction details with the pond depth, inlet position, spill-box return, motor location, and maintenance access.
Measure the available height before approving the foundation or tank connection. Also inspect the route for piping, drive access, and removal of wear components. A vertical froth pump can fit a compact process area, but the complete installation envelope still controls the final choice.
What to weigh
Your shortlist
VFD means Vertical Froth Duty Slurry Pump. The name identifies the series as a vertical slurry pump intended for froth transport. This is useful when comparing it with a horizontal arrangement or an AF pump reference during equipment review. Use the series name together with the required capacity, head, and media description so we can identify the intended duty correctly.
The VFD series uses TV, TVR, and PNL bearing options. The bearing body attaches to the motor cabinet or motor frame, making its position relevant to the support structure and motor layout. Include the selected pump size and drive arrangement in the equipment review so the bearing option can be matched to the required assembly.
The double-case design allows the centrifugal pump configuration to be adjusted for the media. This matters when slurry properties vary between duties or when a circuit combines froth with abrasive or corrosive conditions. Describe the media alongside the operating point so we can evaluate the configuration and material choice together rather than treating the pump size as the only decision.
Choose the VFD Vertical Froth Pump when froth or high-viscosity liquid is central to a vertical slurry duty. The tangential inlet, spill box, material option, bearing arrangement, drive, and available height should fit the pond, piping, media, and maintenance layout. For a quote, send the required capacity, head, media condition, and installation arrangement.
The company
Established in 2013, Hebei Xiangmai Pump Industry specializes in manufacturing slurry pumps and spare parts. We deliver end-to-end solutions including product selection, installation, and after-sales support. Our engineered solutions serve critical sectors including mineral processing, metallurgical operations, coal preparation, and power generation. The product range encompasses over 10 distinct pump series, featuring 100+ variants across 1,000+ configurations to address specialised industrial requirements.…
About Us ↗Visit company website ↗